Configuration Menus Function Summary

T S - 2 0 0 U S E R G U I D E

Menu Code	Feature/Value Name	Explanation
1	Phone book	Program entries in the phone book

2	Speed dial	Program speed dial buttons
3	Headset	Enable/disable headset mode

4	Voicemail #	Program voicemail/messages dial string
5	Ring tone	Ring tone control
6	LCD contrast	Change the LCD contrast
7	LCD backlight	Time in seconds for LCD backlighting to stay on

8	Features	Accesses the features menu
9	Autodial prefix	Access code to be dialed to access outside line

0	Set time/date	Set the TS-200 time and date
*	Advanced cfg.	Accesses the advanced configuration menu
#	About	Displays the TS-200 firmware version
8-1	Time format	Sets the display format for time

8-2	Date format	Sets the display format for date
8-3	Auto time set	Synchs the time and date using incoming Caller ID

8-4	Auto-answer	Automatically answer incoming calls
8-5	Store Caller ID	Enable/disable call log
8-6	Quiet auto-dial	Enable/disable speaker when dialing stored phone numbers
8-7	Format numbers	Format numbers with dashes. ie: 1-613-725-2980

8-8	Auto idle/hold	Phone returns to Idle after hold is pressed
*-1	System features	Accesses system features menu

*-2	Softkeys	Reprograms softkey labels and codes
*-3	Flash time	Duration of the line interruption when Flash is pressed
*-4	Pause time	Duration of pause when inserted in dial strings
*-5	Autodial time	DTMF digit duration for stored/pre-dialed phone numbers

*-6	Autodial gap	Length of inter-digit pause for stored/pre-dialed phone numbers
*-7	Release time	Duration of on-hook when call released - 0= remain idle

*-8	Key time out	Data entry key time-out
*-9	LCD test	Lights all LCD segments for test
*-0	Download	NOT USED
--	Factory reset	Resets the programming to factory defaults

*-1-1	PBX direct line	Disables dialing of the line access code (auto-dial prefix)
*-1-2	PBX hold	Flash for hold or local hold

*-1-3	PBX FSK	Receive TalkSwitch FSK commands
*-1-4	PBX download	Enable direct FW download from TalkSwitch
*-1-5	Hold release	Return the phone to idle when a call is put on hold
*-1-6	Disconnect clear	Return to idle when a line disconnect is detected

*-1-7	Light w/off-hook	Turn message light on when off-hook
*-1-8	Extended DTMF	Enables extended DTMF (A-D) dialing

1 8	W W W.T A L K S W I T C H . C O M

CONFIGURATION MENUS FUNCTION SUMMARY

Explanation

NOT USED

W W W.T A L K S W I T C H . C O M