VideoPhone BVP 8882 SIP packaging description
The VideoPhone BVP 8882 SIP package includes:
-VideoPhone BVP 8882 SIP user manual.
-An integrated 5 inch LCD display which can be folded and rotated.
-An integrated CCD camera for capturing images.
-An integrated microphone for sound capturing and intelligence are also required to allow for Videophony service.
-3 LEDs on the keypad: one yellow "Vidéo" LED which is active(on) when video is transmitted by the terminal
(i.e. when the camera is active) or which flickers when the videophone is ringing. One green "En Service" LED which is active(on) permanently when the terminal is connected
(i.e. has received an IP address) and ready for service or flicking. One red "Message" LED which flickers when a new vocal/video message is received.
-A small LED screen (with Leadtek logo around it) on the surface of the LCD cover: when the LCD panel is closed, this will indicate the status of new messages or incoming calls.
For incoming calls, the LED frequency interval should be: 125ms on;125ms off; 125ms on, 125ms off. For message indicators (new message is based on H.450.7 protocol), the LED blinks at an interval of 125ms on,125ms off, 125ms on, and 750ms off, and so on.
-A wired handset.
-A power cord / power adaptor with a secure lock mechanical design to connect the VideoPhone BVP 8882 SIP tightly.
-An ethernet cable is used to connect VideoPhone BVP 8882 SIP to an ADSL modem either directly or through a PLT (optional).
-Two USB (1.1) interfaces which provide wireless network connection solution via Leadtek USB WiFi Ethernet dongle (optional).
-An A/V Convertible Cable which provides one pair of Audio/Video input (with green ring near the connector) of RCA female connectors and one pair of Audio/Video output (with red ring near the connector) of RCA female connectors.
BVP 8882 SIP User's Manual 4