To change this setting:
* Press and hold the calls key until the display shows.
SET LIST TYPE
<UNANSWERED ALL >
*The current setting sill flash. Using the cursor keys 
and 
select the desired mode.
*Press the store key to set the mode.
VIEWING THE CALLS LIST
When the telephone receives a new call, the red indicator above the calls key will flash and the new calls display on the LCD will indicate the number of new calls that have not been viewed.
To view the calls list
* Press the calls key to access the calls memory. * Use the scroll key to view the memory content.
When viewing the calls list, each entry on the display will show.
*The time the call was received
*The date the call was received
*The location of the number in the memory (1 to 3)
*If the call was, answered or not (ALL calls mode)
*The number of the caller
*The name of the caller (if stored in the memories or directory)
*Note: There are circumstances where the telephone number of the caller may not be available due the caller having a private number or calling from a payphone or overseas. Such calls will be displayed on the screen as PRIVATE or UNAVAILABLE.
EDITING THE CALLS LIST
When the calls memory contains its capacity of 30 enteries, any new calls entering the memory will 'Push' the oldest entry out.
20