∙Refused Busy
Use the up and down arrow buttons to move through the list.
When finished, select the softkey that corresponds to EXIT.
Save changes to your settings
Normally, the user is prompted to save the changes they have made. However, they may manually want to save the changes.
1.Select the softkey that corresponds to CONFIG on the screen.
2.Highlight Save Settings.
3.Press Select.
4.Select the Softkey that corresponds to YES to save any changes OR select NO to cancel saving the changes.
5.Press the Exit button on the screen.
Reset the phone to its factory defaults
WARNING: Do not reset your phone to its factory defaults unless instructed by your System Administrator.
1.Select the softkey that corresponds to CONFIG on the screen.
2.Highlight Set Factory Defaults.
3.Press Select.
4.Select the softkey that corresponds to YES to restore the factory defaults OR select NO to keep the Configuration as is.
5.Phone automatically reboots.
635 Crosskeys Office Park • Fairport, NY 14450 • Toll Free
© 2004 InSciTek Microsystems, Inc. All rights reserved. Allworx is a registered trademark of InSciTek Microsystems. All other names may be trademarks or registered trademarks of their respective owners.
21