Making and Answering Calls

Making a call

With your telephone you can make and answer calls using your handset or c for speakerphone capabilities.

To make a regular call:

1.Lift the handset or press c.

2.Enter the number using the dial pad.

Answering a Call

To answer a call:

1.Lift the handset or press c.

Using the Hold Key

To put a call on hold and take a call off hold:

1.Make or answer a call.

2.Press O. The set indicator light will ßash quickly to indicate there is a call on hold.

3.To retrieve the call, press Oor c. If you don’t retrieve the call within 15 minutes, the call is automatically dropped.

Note: The 9110 automatically releases a call on hold when a person on an extension telephone on the same line picks up the call. If you don’t hang up the handset after you have put a call on hold and that call is picked up by someone at another extension, the call is taken off hold but remains connected to your telephone. If this happens, any background noise from your area will be heard by the caller and the person at the other extension.

Making a Handsfree call

You don’t have to use the handset to use your telephone. Instead, you can use Handsfree mode to place a call, or you can switch to Handsfree mode while a call is in progress.

Making and Answering Calls

To dial without picking up the handset:

1.Press c.

2.Dial a number using the dial pad.

3.When the call is over, press N.

To switch to a Handsfree call:

1.Lift the handset.

2.Dial a number using the dial pad.

3.To switch to handsfree, press c.

4.Hang up the handset.

5.When the call is over, press N.

Note: After ending a handsfree call, you may Þnd you must wait for at least

2 seconds prior to pressing cto obtain dial tone and initiating your next call. This time is required to allow the network to completely disconnect your last call.