Making and Answering Calls
Muting a handsfree call
You can turn off the microphone so that the caller can’t hear you but you can still hear the caller. Muting a call only works when you are in Handsfree mode.
To mute a handsfree call:
1.Press c.
2.Without lifting the handset, make a call.
3.To turn off the microphone, press c. You can hear your caller but your caller cannot hear you. The light next to the key will flash to indicate the mute is on.
4.To speak to your caller, press cagain. Each time you press c, you turn the microphone on or off.
5.When the call is over, press N.
Using Redial
Pressing Redial dials the last number dialed.
To make a call using Redial:
1.Lift the handset or press c.
2.Press b.
Adjusting the Handset and Speaker volume
Press the left or right side of the volume bar Rto adjust the volume on
the handset or speaker. The handset volume resets to factory set volume level after each call. The speaker volume remains at the level selected until the next time you change it.
Adjusting the Ringer Volume
The ringer volume is controlled by a three position switch on the side of the Model 9110. The ringer volume can be set to low, medium, or high.
Set Indicator Light
The set indicator light, located on the top right hand corner of the Model 9110, flashes and illuminates to provide information as follows:
Set indicator light flashes very quickly.
Set indicator light flashes quickly. (2 pulse/sec.)
Set indicator light flashes slowly. (1 pulse/sec.)
Incoming call.
Line is on HOLD.
Message Waiting*.
9