Setting Up Your System, Wall-Mounted Unit

Setting Up Your System

The AastraLink RP 500 can be wall-mounted or placed on a desktop.

Wall-Mounted Unit

The template, screws, and anchors from the wall-mounting kit are used to mount the AastraLink RP 500 on the wall. The bottom of the unit should be against the wall when mounted.

1.Use the provided template to mark locations for mounting screws.

2.Drill holes at marked locations and install anchors.

3.Apply screws to anchors.

4.Align the AastraLink RP 500 on the screws.

Desktop Unit

Place the AastraLink RP 500 on a flat surface.

Connecting to Power and the Local Area Network

1.Plug one end of the Ethernet cable into the Local Area Network (LAN

and the other into the AastraLink RP 500 Ethernet jack .

2.Connect the power cord to the AastraLink RP 500 power jack , and plug the other end into an electrical outlet.

AastraLink RP 500 Base Unit

Power

Local Area Network (LAN)

Confirm that all cables and cords are properly seated into their respective ports and outlet.

You are now ready to setup the other components of the AastraLink RP system, following the appropriate Installation Guides.

4AastraLink RP 500 Installation Guide