3456, Auto dialing key registration erasure

Step 5. Press the new keys to register using the dialing keys [0] – [9] or function keys [], [#] or [REDIAL].

2	: 1 2	3456	Example of "123456" being entered
			Example of "123456" being entered

Notes

•If the [C] key is pressed before dialing a complete number, the contents before the [C] key was pressed are all erased.

•Mark "-" is displayed when the [REDIAL] key is pressed.

•The display shown below is an example of entering the functional number of paging.

2 :8 0#

Step 6. Press the [PTT] key after completing the entry of the registration number.

Registration is then completed, as indicated by a confirmation tone.

2	: 1 2	3456	Example showing the registration completion of "123456"
			Example showing the registration completion of "123456"

Step 7. Shift the [REGISTER] switch back to the OFF position. The station will be placed in standby mode.

11 : 59am

8.6.3. Auto dialing key registration erasure

Step 1. Set the [REGISTER] switch on the master station's top panel to the ON position. The display panel will be placed in registration mode.

Re g –mode

Step 2. Press the [PTT] key.

The following characters will be displayed.

Au t o d i a l

Step 3. Press the registered auto dialing key to delete. The selected key number (example: [2]) will be displayed together with the registered number.

2	: 1 2	3456	Example showing "123456" has been registered
			Example showing "123456" has been registered

Step 4. Press the [PTT] key.

The registered number displayed after the auto dialing key [2] will be erased.

2	:	Example of auto dialing key [2]
		Example of auto dialing key [2]