Step 5. Press the [PTT] key again.
The erasure is then completed, as indicated by a confirmation tone.
2 | : | Example of auto dialing key [2] |
|
|
Step 6. Shift the [REGISTER] switch back to the OFF position. The station will be placed in standby mode.
11 : 59am
8.6.4. Auto dialing key registration confirmation
Step 1. Set the [REGISTER] switch on the master station's top panel to the ON position. The display panel will be placed in registration mode.
Re g
Step 2. Press the [PTT] key.
The following characters will be displayed.
Au t o d i a l
Step 3. Press the registered Auto dialing key to be confirmed. The selected key number (example: [2]) will be displayed together with the registered number.
2 | : 1 2 | 3456 | Example showing auto dialing key [2] registration display |
|
|
|
If the registered number being displayed exceeds the available display screen, pressing the [#] key advances the display to the next digit screen, and pressing the [
] key returns the display to the previous digit screen.
Step 4. Shift the [REGISTER] switch back to the OFF position. The station will be placed in standby mode.
11 : 59am
15