![](/images/new-backgrounds/1140624/14062437x1.webp)
2.CONNECTIONS
Overview
The figure below shows where to connect various equipment at the rear of the transceiver unit.
ANT |
|
Connects antenna. | Ground terminal. |
24VDC Connects power cable.
PRINTER |
| EXT SP | CH70 RX ANT |
Connects printer | Connects junction box | Connects external | Connects DSC |
| loudspeaker. | antenna here. |
Connection of Power Supply
Convention vessels, 100/220 VAC ship’s mains
Convention vessels must supply both AC and DC power to the
Connect the radio battery to the DC IN terminal on the
Radio battery (24 VDC)
Attach the connector supplied to the power cable and plug it into the 24VDC connector at the rear of the transceiver unit. Connect the wire ends to the radio battery line.