Furuno FM-8800D/8800S manual Remote station RB-8800/RB-8810 option

1. MOUNTING

Remote station RB-8800/RB-8810 (option)

Up to four remote stations can be connected in a daisy chain.

Note: For the remote station RB-8800, there are two method of cable entry: bottom-side entry and rear-side entry. For rear-side entry, make one or two holes of more than 12 mm diameter. For last station in the daisy chain, just one cable entry hole is needed.

1.Remove screws on the handset hanger (four for RB-8800, six for RB-8810).

2.Remove upper chassis of the hanger.

3.Mount the base of the hanger to a bulkhead with self-tapping screws 4x20 (four for RB-8800), or 4x16 (two for RB-8810).

4.After connecting cables, assemble the remote station.

5.For RB-8800, attach blind seals on the screws.

entry		77	Handset
			HS-8800	Screws 4 pcs.
				Attach blind seal
Cable						20 30			Cover of handset hanger
	12			on the screws.
	φ
	12		Handset hanger		63					33
	φ
			HG-8800							Nameplate
					40					0.5
										±
								DISTRESS		140
				Cable entry
				(Rear)				VOLUME
	#150									4-φ4.5
										Fixing holes
						40±0.5	40	±0.5
										Cable entry
										(Bottom)

Remote station RB-8800

	Hanger
	HG-8810	Handset
	(77)	HS-8800
	57
	12,Cableentry	65		Cable entry
(208)		Nameplate	22	0.5 42
	φ	208		145
				±
#150				2-φ4.5
				Fixing hole
		Hanger	Hanger mounting base

Remote station RB-8810

1-8