Speaker, Listen and Sense Adjustments

Speaker, Listen and Sense Adjustments:

These adjustments allow the TE-100 to be to tailored differently for each installation. The factory settings should work well in most homes. The sense control may need special adjustment as it can be affected by outside noise and the level and type of voice that the user presents when speaking into the phone.

The R8 SPEAKER adjustment sets the volume level for the front door speaker. It should only need adjustment when long runs of wire to the speaker are employed. Note that the TE-100 is designed to power speakers up to a distance of 1000 feet away. On short wire runs, the amplifier may oscillate if too much gain is used. If this occurs turn the speaker adjustment clockwise to reduce the volume level at the speaker. The factory setting is positioned at 3 o’clock.

The LISTEN adjustment sets the volume level heard through the telephone. This should be set to 75% to 80% of maximum volume. Too much gain can cause the VOX circuit (the link between the visitor at the door to the inside telephones) to switch on its own. A clockwise adjustment decreases the volume through the ear piece. The factory setting is positioned at 7 o’clock.

SENSE adjusts the sensitivity of the voice switching circuit. Depending on the set- ting, the switch may be more sensitive (responsive) to the visitor at the door or more responsive to the person speaking from the phone. In either case, if the setting is too little toward any side the speech will be "broken" and words (or parts of words) will become cut off. There is also an interplay between the listen control and the sense adjustment. If the listen adjust is set too high, it can affect the sense adjust because it is sending a level of sound from the speaker that exceeds the telephone signal. A counter clockwise adjustment decreases the amount of background noise. If set be- yond the 6 o'clock position, the TE-100 may pick up too much outside noise such as cars passing by. The factory setting is positioned at 3 o’clock.

The factory settings should work well in most cases. However, wire length, outside background noise and the placement of the speaker can all affect the overall system performance making some adjustments necessary.

Speaker

3 O’Clock

Listen

7 O’Clock

Sense

3 O’Clock

TE-100 specifications

The Channel Vision TE-100 is a versatile and efficient Ethernet over Coax (EoC) technology solution designed for enhancing network connectivity in various residential and commercial environments. Built to address the increasing demand for high-speed data transmission, the TE-100 offers an innovative way to leverage existing coaxial cable infrastructure for modern networking needs.

One of the standout features of the TE-100 is its ability to deliver high-performance Ethernet connectivity over coaxial cabling, reaching speeds of up to 100 Mbps. This makes it an ideal solution for users looking to extend their network without the need for extensive rewiring or installation of new cables. The device can effectively bridge gaps in signal range and provide reliable connectivity in areas where traditional Ethernet may struggle, such as in larger homes or multi-unit dwellings.

The TE-100 incorporates advanced EoC technology, which enables data transmission alongside existing video services without interference. This allows users to enjoy high-definition streaming and reliable internet access simultaneously. Its ability to coexist with other services ensures that users do not have to choose between internet speed and video quality.

Another significant characteristic of the TE-100 is its user-friendly setup. The device is designed for easy installation, making it accessible even for those who are not particularly tech-savvy. With minimal configuration required, users can quickly set up the device and enjoy enhanced connectivity within minutes.

The TE-100 is compatible with various network devices, including computers, smart TVs, and gaming consoles. This versatility makes it an excellent choice for home entertainment systems, online gaming, or smart home applications. Its robust design and quality components ensure durability and long-lasting performance, making it a reliable addition to any network setup.

Furthermore, the TE-100's compact design allows for convenient placement in limited spaces, blending seamlessly with existing home or office decor. Its sleek appearance and functionality make it an attractive option for users who value both aesthetics and performance.

In summary, the Channel Vision TE-100 stands out as a powerful and efficient Ethernet over Coax solution that meets the demands of modern networking. Its high-speed connectivity, easy installation, compatibility with a wide range of devices, and durability make it an outstanding choice for users looking to enhance their network without the hassle of extensive upgrades. As more devices become interconnected, solutions like the TE-100 will play a crucial role in facilitating seamless and reliable communications.