TELEPHONE FEATURES
LAST NUMBER REDIALING
1.Pick up the HANDSET or press the SPEAKERPHONE button (you also need to press the LINE 2 button if you want to make call using line 2).
2.Press the REDIAL/PAUSE button. The last dialed number appears in the display and is automatically dialed.
STORING PHONE NUMBERS INTO MEMORY
1. Press the STORE button. 
(short for programming) appears in the display.
2. Dial the phone number you want to store. You can store up to 22 digits (including a
TONE ( 
) and a PAUSE (REDIAL/PAUSE), each of which is counted as one digit, if the
TONE
digit you entered is incorrect, press the DELETE button to delete it and enter a correct one).
3.For 3
Press one of the 3
For 10 two-touch dialing:
Press AUTO button, and then press one of the dialing keys (0 to 9) to store a phone number in.
4.The stored number and the location will be shown in the display.
5.Repeat steps 1 to 4 to store numbers into other memory locations.
NOTE
When the batteries are dead or removed and the AC adaptor is not connected for more than five minutes, the stored numbers may be erased.
MEMORY DIALING
1.Pick up the handset or press the SPEAKERPHONE button (you also need to press the LINE 2 button if you want to make call using line 2).
2.For 3
Press one of the 3
For 10 two-touch dialing:
Press the AUTO button, and then press one of the dialing keys (0 to 9).
3. The phone will dial the numbers you stored into that memory.
PAUSE FUNCTION- For analog PBX line or long distance service use
This prevents misdialing when you redial or dial a stored number.
Example: In an office where you need to dial a 9 first to get an outside line. Dial the number 9 and press the REDIAL/PAUSE button, and then dial the phone number. You will see a “
” displayed for pause. You may also store this into memory. Pressing the REDIAL/PAUSE button more than once increases the length of the pause between numbers.
FLASH FUNCTION
This allows you to use special features of your host PBX such as transferring an extension call or for call waiting features (call waiting feature should be subscribed from the telephone company, when you are in conversation, a new call comes in the line you are using, you will hear a click, press the FLASH button on your telephone, you will put on hold the party you are having conversation with and be able to talk to the new caller, after you finish the conversation with the 2nd caller, press the FLASH button to return to the 1st call).
MUTE FUNCTION
During conversation, if you press and hold the MUTE button, you can hear the sound from the other party but the other party cannot hear you.
12IB-PH568-WM-E-040506
7/4/2006, 4:28 PM