DESK USE / WALL MOUNTING
NOTE: For either desk use or wall mounting, you need to install the included adaptor.
If you do not have a modular wall phone plate installed, please consult with your phone company or installer to get one.
1.HANDSET CLIP - When the phone is mounted on the wall, the HANDSET CLIP must be adjusted so it will hold the HANDSET.
A. SLIDE OUT | B. REVERSE | C. REPLACE INTO PHONE |
Tab hidden for | Tab sticks up for |
desk use | wall mounting |
2. At all times (to use a desk phone and as a wall phone) you must use the plastic (box shape) WALL MOUNT ADAPTOR, please install the WALL MOUNT ADAPTOR following the arrow and the description on the adaptor.
For desk use, install
bracket with this arrow facing up and in upper part of phone
For wall mounting, install bracket
with this arrow facing up and install bracket on lower part of phone
3. Connect the telephone line cord. If you use wall mounting, in order to avoid the exposing of the long telephone cord, please use the supplied short wall cord, plug one end into the LINE 1 (L1 for L1/ L2) jack, route the cord into the channel at the phone back, and the other end into the wall jack.
4. Put the phone over the wall plate, make sure both posts fit into slots on the back of the phone. Then slide the phone down to lock the phone into the wall plate.
5.Connect the AC adaptor (see page 7) and another line cord (if you connect two single- line telephone jacks, see page 8).
14IB-PH568-WM-E-040506
7/4/2006, 4:28 PM