Dynacord owner manual DTI 2000 Operation Example, 111 or

60	TALK	All groups	9	Starts an announcement in all zones with
				priority 9
…	…	…	…	…
70	MACRO	Nr. 15	0	Triggers macro No. 15
71	MACRO	Nr. 16	0	Triggers macro No. 16
…	…	…	…	…
99	CLEAR	0	0	Clears the actual zone / group selection
0 (or 00)	STOP	0	5	Stops audio signals with a lower priority than 5,
				which have been launched from the DTI 2000
*	TALK	Current selection	3	Starts an announcement in the current selected
				zone(s) with priority 3

Setting the DTI 2000’s password codes is possible in the general paging console dialog. The two access levels have individual passwords. The default password settings are 111 (3-digit for user level

1)and 2222 (4-digit for expert level 2). Access level 1 only allows zone / group selection and making announcements through the use of the asterisk key (*) while the expert level 2 provides access to all functions (announcements, text message playback, macros, stop, etc.). Password-protection is inactive, so that anybody has access to the functions of the corresponding level, when entering “0” as a password.

In the DTI 2000, the attributes microphone compressor, tone signal and German date have no function and should be left at their default setting.

DTI 2000 Operation Example

Based on the configuration example of the previous chapter, the following commands can be carried out through the DTI 2000:

Function	Dial Numbers	Remarks
Connection number	0123 456789	Select the phone number of the DTI 2000 connection
Password	111 or 2222	Select the password for access level 1 or 2
Announcement in a single zone	1*	Selects zone 1, starts an announcement with priority 3
Announcement end	#	Stops an announcement while keeping the connection
Announcement in several zones /	2#3#9*	Selects zones 2, 5 and group 2, starts an announcement
groups		with priority 3
Hang up	*	Stops an announcement and drops the connection
Collective call	11*	Selects all zones, starts an announcement with priority 3
Clear incorrect selection	1#2#3#99	Selects zones 1, 2 and 5, clears the selection
Start text message playback	50*	Starts text No. 2 in group 3 with priority 4
Stops text message playback	0*	Stops text No. 2 (if launched from the DTI 2000)
Direct call	60*	Starts an announcement with 9 in all zones
Start macro	70*	Starts macro No. 15
Clear incorrect function entry	71#	Clears an erroneously made entry of macro No. 16
		(does not start the macro)
Hang up	*	Stops an announcement and drops the connection

*** DTI 2000 tone signals (table)

DTI 2000 Manual e EDITED.doc 13