Dynacord DTI 2000 owner manual Test Functions, Specifications

Test Functions

The processor system automatically runs an initial self-test whenever the DTI 2000 is connected to the mains. During this procedure, first the red DROP LED should light. Afterwards, the orange TALK LED blinks for approximately 3 seconds. In case faulty operation is being recognized, the processor system stops and the DROP and TALK LEDs light. Otherwise the DROP LED is dimmed and only the red DROP LED lights as long as a telephone connection has not been established.

Pressing the SEIZE / DROP button on the front panel manually establishes a connection (pick up) or drops a connection (hang up). When the button is used to “take a call”, the green SEIZE LED should light and the red DROP LED should be dimmed. Pressing the key once again drops the connection and the red LED lights while the green LED is dimmed.

The orange TALK LED lights when the DTI 2000 is in announcement mode (i.e. when a telephone announcement in a single or several zones of the PA-system has been activated).

Specifications