Unpacking and Installation, System Requirements

DUV1000 User’s Guide

2 Unpacking and Installation

Open the shipping carton and carefully remove all items. In addition to this User’s Guide, make sure you have received all of the following items:

•Modem IP phone, DUV1000

•One telephone cable (RJ-11)

•Handset

•Handset cord

•Power adapter

•Warranty card

If any item appears to be missing or damaged, please contact your local reseller.

2.1System Requirements

You will need the following to use DUV1000.

•AC power outlet (230V, 50Hz)

•Local telephone line connection

•Access to dial-up Internet connection (via ISP) that is PPP compatible

•Account with a VoIP (Internet Telephone) service provider

2.2Installation

1.Connect the handset to DUV1000 with handset cord.

2.Plug one end of telephone cable (RJ-11) into the LINE port on the rear panel of DUV1000 and the other end into a working telephone wall jack.

3.Plug the AC power adaptor provided into an AC outlet and insert the power cord into the connector marked “AC” on the rear panel of the DUV1000.

4.Lift the handset and listen for the dial tone that indicates the DUV1000 has been installed properly. If you do not hear a dial tone, check that the power adaptor is plugged into a live electrical outlet and that the power cord is pushed securely into the connector.

5.Now DUV1000 is ready for basic configuration as described in the next section.