Motorola 6881029B40-A Time and Date Alerts Locking Messages, Setting the Incoming Message Alert

➏Press Kto activate the time and date setting.

zv 03:15PM 05/05/97z

c12:00AM --/--/--

SET TIME

Example of Set-Time Screen

If you move the cursor past the last symbol in the row (far right), it automatically wraps around to the first symbol in the beginning of the same row (far left).

Note: To exit from any screen without making changes, press J.

11

➊From the Function menu, press H to move the cursor to l.

➋ Press K to display the Choose alert menu.

➌ Press Hor Ito move the cursor to the desired alert. The pager gives

a sample of each alert as you move through the selections.

➍ Press K to activate your selection. The pager gives a sample of the alert to confirm your selection.

Setting a Silent (Vibrate) Alert

Note: If P is not displayed in the Standby screen, your pager is already in the silent alert mode.

➊From the Function menu, press H to move the cursor to r.

➌Press Kto activate the silent alert. The pager vibrates to confirm your selection. The P symbol is removed from the Standby screen.

13

TIME AND DATE ALERTS

ALERTS LOCKING MESSAGES

Setting the Incoming Message Alert

You can set your pager’s incoming message alert to an audible alert, a vibrating alert, a chirp (short beep) alert, a chirp alert with vibration, or no message alert (completely silent).

Note: Priority messages always have an audible alert.

Setting an Audible Alert

➊From the Function menu, press H to move the cursor to s.

➋ Press K.

When P is displayed on the Standby screen, your pager is in the audible alert mode.

Setting the Alert Pattern

You can set your pager to alert audible with a standard alert (1), one of seven pleasing alerts (2-8), a chirp alert (j), or a chirp and vibrate alert (). You can also select no message alert (r).

Your pager must be in the audible alert mode (P displayed in the Standby screen) to select an alert pattern.

12

Locking and Unlocking Messages

Up to 10 messages can be locked to prevent them from being deleted or from being replaced when memory is full.

When a message is locked, the m symbol is replaced by the g symbol indicating the message is locked.

To Lock or Unlock a Message

➊From the Message-status screen, press Hor Ito select the message you want to lock or unlock.

➋Press K.

➌Press I to move the cursor to g to lock the message, or h to unlock the message.

➍Press K.

To lock or unlock a message while reading it, follow steps 2 through 4 above while the message is displayed.

14