Motorola 6881029B40-A manual Message Alarms Private Time

Message Alarms

This feature allows you to set a one-time or daily alarm for a selected personal message. You can set an alarm for up to five personal messages.

When a message alarm is set, b replaces m in the Message-status screen. At the time the alarm sounds, m is again displayed unless the alarm is set to alert daily. Press Jto display the message for which the alarm is set. If the alarm times passes without being acknowledged, b flashes until the message is read.

To Set a One-time Message Alarm

➊From the Message-status screen, press Hor Ito select the message you want to alarm.

➋Press K.

➌Press I to move the cursor to d.

19

➐Press F or G to adjust the hour digits.

➑Repeat steps 6 and 7 to adjust the minutes, AM/PM/24 hr., and date.

➒ Press Kto activate your selection.

You can also set a message alarm while reading the message by following steps 2 through 9 above.

To Set a Daily Message Alarm

➊Follow steps 1 through 8 to set the message alarm time.

➋When setting the date in step 8, press Guntil you see double dashes for the month, day, and year (--/--/--).

➌Press K to activate your selection. The alarm is now set to alert every day at this specified time.

Note: To exit from any screen without making changes, press J.

21

➍Press K. The Set-message-alarm screen is displayed.

zv 03:15PM 05/05/7z

zc15:30PM 05/05/97z

SET ALARM

Example of Set-Message-Alarm Screen

The alarm symbol shows the current alarm status. c is displayed if the message alarm is enabled, e is displayed if the message alarm is disabled.

➎Press F or G until c is displayed.

➏Press I to move the cursor to the hour digits.

20

Private Time

You can select a time period during which your pager is completely silent. Your pager still receives messages but is does not alert. The pager alerts only if an alarm expires or a priority message is received.

To Set Private Time

➊From the Function menu, press H to move the cursor to 3.

➋ Press K.

When the Private-time screen is first displayed, the cursor is at the flashing symbol on the far left, 3 indicates private time is enabled, µindicates private time is disabled.

ON OFF

3 3:15PM 5:00PM

Example of Set Private-Time Screen

22