Motorola CP1250 manual Setting UP

Setting the Time and Date

￿	On the Function menu, press vor s to move to i (SET TIME/ALARM).
	Press t. The Set Time screen is displayed.
￿
	Pager status	H Y	L›	):)) S	)!/)!
	Set Time		H_ 00:00	01/01/00H
	fields		J 00:00	--/--/--
			SET TIME
			Set Time Screen example
	Press s to move to the hour field.
	Press x or w to adjust the hour.
￿Press s to move to the first digit of the minutes field.
￿Press x or w to adjust the first digit of the minutes.
￿
￿Repeat Steps 5 and 6 to adjust the second digit of the minutes field, the
￿	method of time measurement (-, " or ), month, date, and year fields.
￿	Press t to accept the time and date changes.

SETTING UP

7

SETTING UP

8

Setting the Pager Alert Mode

The alert can be set as either audible or silent.

On the Function menu, press v until one of two possible prompts is ￿displayed: SET SILENT ALERT ([k] to change from audible to silent alert mode) or

SET AUDIBLE ALERT ([f] to change from silent to audible alert mode).

Press t to accept the new alert mode. The pager emits a sample of the new ￿alert.

Setting the Pager Alert Pattern

The pager must be set for an audible alert to select an alert pattern. There are ten alert pattern options: one standard alert (1), seven different pleasing alerts (2 through 8), a chirp alert (O), and no alert (k).

￿	On the Function menu, press s to move to e (CHOOSE ALERT).
	Press t. The Alert pattern screen is displayed.
￿
		1	2 3 4 5 6 7 8 O k
			STANDARD ALERT

Alert Pattern Screen example

￿	Press v or s to move to the desired alert. A sample of each alert is emitted
	as you scroll through the selections.
￿	Press t to accept the selected alert. The pager emits the selected alert (for
	any selection except k) as it returns to the Status screen.
Setting the Pager Alarm
You can set two clock-type alarms:
	• One-time only—Specify the time and date.
	• Daily—Specify the time only. The alarm expires daily at the same time.
	On the Function menu, press s to move to i (SET TIME/ALARM).
	Press t. The Set Time screen is displayed.
￿Press w or x. The Set Alarm screen is displayed.
￿
	Pager status	H Y	L›	!@:)% m	)%/)!
￿	Set Alarm		_ 12:05"	05/01/00
			HJ 12:00-	--/--/--H
	fields

SET ALARM

Set Alarm Screen example

Press s. The alarm indicator (J) flashes.

￿

SETTING UP

9

SETTING UP

10

	Press w to change the indicator from J (alarm off) to r (alarm on).
	Press s to move to the hour field.
￿Press x or w to adjust the hour.
￿
￿Repeat Steps 6 and 7 until you have set both digits of the minutes field and
￿	the method of time measurement (AM, PM, or ) field. If this is a one-time

only alarm, also use Steps 6 and 7 to set the month, date, and year fields. If this is a daily alarm, leave the dashes (--) in the date fields and go to the next step.

Note: Only AM or PM can be changed. If you are using the time measurement, you cannot change it here.

Press t to accept the alarm setting.

￿In the upper-left corner of the pager, R is displayed, indicating the alarm is set. When the alarm expires, R flashes and the pager either vibrates or emits an audible alert until you press a button. If it is a one-time alarm, R disappears from the Status screen after you press a button.