Motorola BRAVOLX Receiving and Reading Messages, Turning the Light on and OFF, Setting the Alarm

RECEIVING AND READING MESSAGES

Your BRAVO LX pager can receive up to sixteen 20- character messages. When a message is received, the pager alerts for eight seconds.

❶ Press any button to stop the alert.

❷ Press W to display the message.

❸Press V twice while reading your message to return to the standby screen.

Messages longer than 12 characters display on a
second screen, indicated by the B symbol. Press W
to display the second screen. The second screen is
displayed automatically after one minute, even if W is
n o t	p r e s s e d .
The last screen of your message displays the mes-
sage slot number and the time received.		TURNING THE LIGHT ON AND OFF
If a message is not read, the pager gives a reminder
alert every two minutes and the screen displays the
		❶ Press Vto turn the light on.
number of unread messages (i.e., 1 Page, 2 Pages)
		❷ To turn the light off, press V again. The light turns
until all messages are read.
If the pager receives more messages than its avail-			off automatically two seconds after returning to
			the standby screen.
able memory can hold, the new message replaces
the oldest read, unlocked message.		CHANGING ALERT MODES
An overflow condition occurs when all message slots
are filled with unread messages and a new message		❶	Press X. Either silent ? or audio ? is
is received. Upon receipt of a message, while the			displayed, depending on the current mode.
pager is in the overflow condition, the oldest unread		❷	If audio ? is displayed, the pager is in “Silent”
message is discarded. In this mode, the overflow in-
			mode. Press W to change to “Audible” mode. The
d i c a t o r r e p l a c e s t h e d e fa u l t i d l e d i s p l ay
			pager chirps.
with	overflow. Messages must be read and erased
to clear the overflow display.
	3	4
❸	If silent ? is displayed, the pager is in “Audible”	❼ Press W to display the 12/24 hour screen.
	mode. Press W to change to “Silent” mode. The	❽ Press Xto change the 12/24 hour mode.
	pager vibrates.
		❾ Press Vtwice to return to the standby screen.
For your pager to vibrate when a message is re-
		SETTING THE ALARM
ceived, it must be in “Silent” mode.
SELECTING AN AUDIBLE ALERT
		❶	Press X until set alarm ? is displayed.
		❷ Press W to select the alarm on/off sequence. on
❶	Press Xuntil set alert ? is displayed.
			or off flashes.
❷ Press W. The current alert number is displayed,		❸ Press Xto turn the alarm on or off. Press W to
	for example: alert 3, and the pager gives a
			switch to the hours. The hour flashes.
	sample of the alert tone.
		❹ Press Xto change the hour. Press W to switch to
❸ Press Xuntil the desired alert type is displayed.
			the minutes. The first digit of the minutes flashes.
	As each alert number is displayed, the pager
		❺ Press Xto change the first minute digit. Press W
	gives a sample of the alert tone.
			to switch to the second digit. The second digit of
❹ Press W to select the alert number, set the alert
			the minutes flashes.
	tone to be used, and return to the standby screen.
		❻ Press Xto change the second minute digit. Press
	When messages are received, your pager gives
			W to switch to AM/PM. The a or p flashes.
	the selected alert only when in the audible mode D.
		❼ Press Xto change AM/PM.
SETTING THE TIME
		❽ Press V twice to return to the standby screen.
❶	Press Xuntil set time ? is displayed.	Note: Steps 6 and 7 apply when in the 12 hour mode.
		The symbol \ is displayed when the alarm is turned
❷	Press W to set the time. The hour flashes.
		on. The pager vibrates or gives a 20-second alert
❸	Press Xto change the hour. Press W to switch to
		and alarm is displayed at the selected time.
	the minutes. The first digit of the minutes flashes.
		If set, the alarm activates even when the pager is off.
❹	Press Xto change the first minute digit. Press W
		Press any button to stop the alarm alert.
	to switch to the second digit. The second digit of
	the minutes flashes.	SETTING THE DATE

❺Press Xto change the second minute digit. Press

W to switch to AM/PM. The a or p flashes.	❶	Press Xuntil set date ? is displayed.
❻ Press Xto change AM/PM.	❷	Press W. The month flashes.

5

6