BARD MANUFACTURING COMPANY, INC.
QW2S-QW5S Water-to-Air H/P
Engineering Specification Guide
1.0GENERAL
Furnish and install a self-contained, vertical, floor standing, heat pump to be manufactured by Bard Manufacturing Company, Inc. The unit shall be approved and Listed by Intertek ETL Listed (ETL US/C). Unit shall be factory assembled, pre-charged, pre-wired, tested and ready to operate. Unit performance shall be AHRI Certified in accordance with ISO Standard 13256-1:1998 “Water to Air and Brine to Air Heat Pumps”, which includes watt allowance for water pumping. Unit shall include 5 year parts warranty covering compressor, parts, and heat exchange coils, subject to terms and conditions of Bard Limited Warranty Agreement.
Unit efficiency shall be specified in terms of EER and COP.
Manufacturers: Capacities shall be as indicated on drawings and units shall be manufactured by Bard Manufacturing Company, Inc. or prior approved equal.
2.0CONSTRUCTION FEATURES
2.1CABINET
Constructed of 20 gauge pre-painted or vinyl laminated galvanized steel. Choices available are either two-tone (vinyl) finish with “slate” front panels and “platinum” cabinet for designer appearance, (gray) or (beige) painted steel (select one). Vinyl finish is very resistant to scratching and marring and is easy to clean. Tamper resistant fasteners are provided for access panels. Unit includes built-in rollers for each installation into wall sleeve and removal for service, if necessary. Front panel is hinged and lockable for filter service and access to primary functional electrical controls.
2.2INSULATION
Cabinet is fully insulated with foil covered, high-density fiberglass insulation with sealed edge treatment and special sound deadening insulation material in the compressor section. All insulation is designed to resist mold and mildew growth and facilitate ease of cleaning.
F1915 (2012 04) | Page 1 of 6 |
