Crimestopper Security Products EZ-55DP, EZ-45DP operating instructions Remote Operation

REMOTE OPERATION

OPERATION:

BUTTON 1 (Lock Symbol):

∙Press and release to Lock doors.

∙Press and Hold for more than 3 seconds to activate “Panic” feature.

BUTTON 2 (Unlock Symbol):

∙Press and release to Unlock doors.

For EZ-55DP only (Driver Door Priority Unlock)

∙Press 2 times for Driver Door Priority Unlock.

BUTTON 3 (Trunk Symbol):

∙Press and Hold for ½ second or press twice to activate trunk pop.

#3

TRUNK

#1

LOCK (AUX#2)

#2

UNLOCK (AUX#3)

BUTTON 4 (Start):

Replacement Battery

∙ Press and Hold for ½ second or press twice to

GP23A (12volt)

Start/Stop Engine.

BUTTON 5 (Vehicle #2/ 2ND Function)

§AUX #2: Press button 5 then press button 1.

§Press and Hold for 2 sec. for vehicle #2. For EZ-55DP only (AUX3/AUX4)

§AUX #3: Press button 5 then press button 2.

§AUX #4: Press button 5 then press button 4.

START

#4	EZEE START	#5
REMOTE
		2ND VEHICLE
STARTER
(AUX#4)		(2ND FUNCTION)

The transmitter supplied with the EZ-45DP/55DP system has five buttons. The button configuration of the EZ- 45DP/55DP is Factory-set and unchangeable. See Page 12 for additional information on how to use your remote to operate a second vehicle equipped with a EZEESTART system.

NOTE: BUTTON #4 and #3 Remote Start/Trunk

There is a deliberate delay or 2 presses (Optional) built into the system on button #4 and #3 to help prevent accidental remote starting from the remote being in your pocket or purse. During normal use, if you press

3