Crimestopper Security Products EZ-45DP, EZ-55DP operating instructions Remote Engine Starting

button #4 or #3 too quickly, the system may not start the engine or open trunk.

REMOTE ENGINE STARTING

REMOTE ENGINE STARTING - SUCCESSFUL START:

1)Press the remote start button for at least 1/2 second (Default) or twice if set for double press.

2)Parking lights flash once; return solid, and the Ignition/Acc circuits turn on.

3)After a few seconds the Starter Motor engages, Parking lights and Acc circuits will turn off while cranking.

4)Engine Starts and Runs. Parking Lights and Acc turn back on, Doors Lock.

5)Engine will remain running for programmed run time until reset with Brake pedal. If needed, the engine can be turned off with remote transmitter by pressing and releasing or double press the Start button.

FLASH 1X

THEN

SOLID

IGN

AFTER

4 SEC.

SOLID

STARTER

REMOTE ENGINE STARTING - UNSUCCESSFUL START

In the event that the engine does not start on the first attempt, the system shuts down for a few seconds, and then attempts to restart the engine a 2nd and 3rd time. For hard starting engines, the unit will allow a starter crank time of up to 10 seconds maximum. This should provide ample cranking time for difficult starts, but is limited to 13 seconds to help prevent damage to the starter from over cranking.

1)If engine starts on 2nd or 3rd attempt, see steps 4 & 5 above of "Successful Start".

2)If Third attempt fails to start engine, the system will turn off and doors will remain locked.

NO FURTHER ATTEMPTS WILL BE MADE AUTOMATICALLY

TURNING OFF A REMOTE STARTED ENGINE:

1)Engine is running in Remote Start (Parking lights ON).

2)Press and release the remote start button.

4