Telex BTR-300 operating instructions PRE-WALK-THRU Checklist

PRE-WALK-THRU CHECKLIST

Following the instructions fully to this point, you have successfully completed the follow- ing checklist:

Set (if necessary) the internal inter- com switches to correspond with the wired intercom.

Located the BTR-300 transceiver properly.

Connected power to BTR-300 transceiver.

Connected the antennas to the BTR-300 with matched color codes.

Set Dynamic/Electret switches in both BTR-300 and TR-300.

Set transmit switch on BTR-300.

Connected headsets to BTR-300 and all TR-300’s

Connected the BTR-300 to any aux- iliary audio, intercom or external speaker.

Installed batteries in the TR-300 Remote Transceiver.

If you missed any of the above instructions, go back and complete that instruction before go- ing on.

-24-