Polycom VVX quick start Features, Connecting the Base Stand, Cable groove

VVX Expansion Module
		Note: The paper module has a plastic
Features		cover that overlays a paper template. To
	Cut out in cover for easy	remove or insert the template, place the
		tip of a paperclip under the slot at the
	cover removal	top-right corner of the cover, lift the cover
		off, and remove or insert the template. To

re-attach the cover, align the six tabs on

Line Keys either side of the cover with the

			corresponding indents on the Expansion
	LED Indicators		Module, and bend the cover into place.
	Plastic cover overlaying		Back
	paper template.		(either model)
	Write phone lines, presence
	contacts or speed dials		Holes for
	on the template.
			thumb screws
VVX Color Expansion Module			(one on each side)
		to anchor metal bracket
Features	Color Display		Slots for
			base stand
			AUX 2 AUX 1
			Cable groove
	Line Keys	(one on each side) to
		hold Cable Connector
			in place
	LED Indicators
	Page Keys. Press a		Auxiliary Ports. Connect the Cable
			Connector to one of these ports, and
	page key to
			to an Auxiliary Port on the phone or
	display more Line Keys.
			another Expansion Module.

Connecting the Base Stand*

Fully insert the stand into one of the slots on the back of the Expansion Module. The slot you choose determines the angle of the Expansion Module. The phone and Expansion Module should be at the same angle.

*For wallmount installation, an optional accessory is available. For more information, contact your reseller.