Polycom RSS 2000 manual RSS can not encode 2CIF/2SIF as a standard resolution when

Known Limitations

Subject

Description

	RSS can not encode 2CIF/2SIF as a standard resolution when
	transforming to WMV file , the WMV file is not correct resolution , just
2CIF/2SIF support	keep same scale with 2CIF or 2SIF , so the anemographic video will
	be showed on PC .
	Disable promotion on the VSX when working with the VSX
LAN Setting	The same LAN Speed need to be forced on the RSS side and in the
	switch side.
Stereo support	SIREN 22 Stereo is supported for H323 Playback. When playing the
	archive using windows media player - the archive will be played in
	mono.
	RSS takes a while to respond to a "stop recording" action at endpoint,
	can not end and play IVR immediately.
	RSS 2000 Can not support 2CIF live streaming, will convert to WMV
	off line.
	There is a limitation here , if you enable HD capacity of RSS , when it
	become the first participant to connect HD endpoint with MP , HD
	endpoint will send HD video format , but once the second endpoint to
	join the conference , HD endpoint will send CIF format video to RSS ,
	if you start recording before changing to CIF format , it means RSS
HD Endpoint	will save 720P and CIF format video in one WMV file , WMV file can
	not support this , it will encode error. It is a known limitation.
Embedded MP
	We have 2 option to avoid this :
integration
	1 Disable HD capacity of RSS when connect to HD MP
	2 After HD MP sending CIF format vide, start to record, before
	other participants leave (if only leave RSS, will change to HD again)
	stop recording.
	I do recommend option 1.
	ƒ When RSS dial into endpoint MP, only when RSS is speaker,
	customer can control RSS by FECC, but once speaker change to
	other participant, it will be back never, so customer can not control
FECC control with	RSS by FECC.
Endpoint embedded	ƒ When RSS dial into endpoint MP, if you press left key to hide the
MP	menu, you will see the loop video on the screen, so don’t hide the
	menu in this situation.
	We recommend when working with endpoint embedded MP, please
	don’t use FECC control, please just use DTMF.
Clustering	Only support 10 H.323 playback, including local and remote playback.
Software shutdown	When use software shutdown command, customer need to turn on
	the power switch after 2 minutes at least , otherwise the system might
	not boot correctly .

27