6Place VoiceStation 100 in the center
of the room on a flat, stable surface and press the Volume Up and Volume Down buttons to adjust the Ringer.
The Ringer has three modes: High, Low, and Off. The Ringer sounds when you press the Volume buttons to indicate current status.
Note: when the On/Off indicator light is lit, the Volume buttons control the sound level of the speaker. When the On/Off indicator light is off, the Volume buttons control the ringer volume.
7Press the On/Off button to get a dial tone.
If you don’t hear a dial tone, you may not be connected to an analog telephone line. For assistance, contact your telephone system administrator or a service technician.
Using VoiceStation 100
redial
on/off
flash hold
To Place a Call
Press On/Off to get a dial tone, then dial the number.
volume up/down
mute
VoiceStation 100 Installation Instructions and User’s Guide
3