LinkPlus Interface Guide: Siemens Hicom/HiPath optiset for SpectraLink e340/h340/i640 Wireless Telephones
Certain characters may be used by the Hicom CS that are not implemented in the handset. Flashing characters are not implemented on the handset, nor is rolling or scrolling of text.
Although the optiset E Basic telephone does not have a display, any display information sent by the Hicom CS will be displayed on the handset.
Wireless Telephone Icons
▪▪ 3 ▪ ▪ ▪ ▪ ▪ ▪ The line indicators are associated with line access keys. In the diagram, line 3 is active.
◄► A left or right arrow is displayed when the screen can be toggled either left or right to display more characters as described above.
▲▼ Up and down arrows are displayed when the menu has additional options above or below what is shown in the display area.
The battery icon displays and a soft beep will be heard while the
Wireless Telephone is in use whenever the Battery Pack charge is low.
User has
The signal strength icon indicates the strength of the signal and can assist the user in determining if the handset is moving out of range.
The voicemail icon indicates that you have a new voicemail message
Low battery This message will display and an alarm will sound while the Wireless Telephone is in standby mode and the Battery Pack is critically low. The Wireless Telephone cannot be used until the Battery Pack is charged.
The download icon indicates that the handset is downloading code. This icon only appears while the handset is running the
[Melody] A melody is played after the Wireless Telephone is powered on for the first time following a completed charge (Charge Complete).
8 | PN: |