Configuration Cradle Window
Copy settings
The Copy settings arrows and checkboxes allow you to copy between the Phone settings column and the Editable settings column. The Sys Grp Usr check boxes allow you to copy just the settings you require.
Upload/download and indicators
When the Read Phone and Write Phone buttons are clicked, they initiate the transfer of configuration data from or to the handset in the Cradle. The handset indicators change color to indicate the state of the transfer. See below for indicator color significance. The Stop button will halt the transfer.
The Serial and MAC windows display the serial number and MAC address of the handset in the Cradle. This information is not stored.
The four labeled flags on the right indicate the status of the configuration transfer:
Active: green when attempting communication with handset in Cradle. Turns yellow if a timeout occurs (may be due to an improperly seated handset). The software will repeatedly
Read: green when information is currently being read from the handset in the Cradle.
Write: yellow when information is currently being written to the handset in the Cradle.
Error: red when an error has occurred. An error message will appear on the status bar at the bottom of the main window.
PN: | 15 |