Polycom IP 600 SIP manual Introduction, Installation, Connect the Network and Power Source

Page 2

User Guide

Introduction

The Polycom SoundPoint IP 600 is a full-duplex, hands-free Session Initiation Protocol (SIP) phone. It provides telephony features, such as Shared Call Appearance, Call Hold, Call Transfer, and Do Not Disturb.

Installation

The following instructions provide basic installation instructions. Contact your system administrator for additional information or assistance.

Connect the Network and Power Source

AC Power Option

Connect the supplied network cable between the LAN jack on the phone and the LAN port on the wall or hub/switch device port.

Connect the DC plug on the AC wall adapter to the

DC jack marked on the phone.

In-Line Power Option

Plug the supplied network cable between the LAN jack on the phone and an available Power and Data port on the in-line power switch if the phone is connected to a compatible Ethernet switch.

Page  of 11

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Shared Call Appearance Introduction InstallationAccess Voice Mail AC Power Option InstallationConnect the Network and Power Source In-Line Power OptionConnect Handset/Headset Attach the BaseFeatures Hold Key DescriptionsRedial Using the Hands-Free Speakerphone Using the SoundPoint IP 600 SIP PhoneUsing the Handset Using the HeadsetGeneral Key Use Call Hold and ResumeMultiple Calls on Hold ConferencingDisable Disable Call ForwardingEnable Shared Call Appearance Multiple LinesMultiple Keys Per Line Multiple Call AppearanceListen to Messages Access Voice MailShared Lines Select Message Center
Related manuals
Manual 27 pages 27.83 Kb
Top Page Image Contents