RTS SSA-424A manual Specifications, Wire Ports

Page 7

Specifications

Specifications

2-Wire Ports

Input / Output Impedance 5,000 ohms, nominal

Operating Level

Audiocom: 1 VRMS, nominal

RTSTW/ClearCom: 775 mVRMS, nominal

4-Wire Ports

Input Impedance 10k ohms, nominal

Output Impedance

200ohms

Operating Levels

-10 dBu, 0 dBu, +4 dBu, +8 dBu, +12 dBu

System to System

Frequency Response

200 Hz to 3.5 kHz, ±4 dB

THD: ≤ 1% @ channel output with nominal input

Environmental

Operating Temp

-20°C to 50°C (-4°F to 122°F) Storage Temp

-40°C to 85°C (-40°F to 185°F) Humidity

0 to 95%, non-condensing

Main Voltage

100 to 250 VAC, 50/60 Hz

Dimensions

1.72” (44mm) High x 8.19” (208mm) Wide x 8.0” (204mm) deep

Weight

5.0lbs (2.3kg)

Finish

Thermoplastic front panel, aluminum case, light gray finish

Approvals

UL, CSA, UDE, CD

Specifications subject to change without notice.

3

Image 7
Contents ADAM, Adam CS, and Zeus Intercoms User Instructions SSA-424A Dual Digital HybridDescription This package should include the followingContents Page General Description FeaturesFront Panel Front and Back Panel DescriptionsBack Panel Wire Ports SpecificationsDescription and Specifications Pin Connection Wire Audio ConnectionsMounting ADAM, ADAM-CS, or Zeus Audio ConnectionRTS TW Audio Connections Rack Mount ConfigurationsAudiocom Audio Connection Other 2-wire Audio ConnectionClear-Com Audio Connection Unbalanced Configuration Wire Call Signal ConnectionsCall Signal Connection for ADAM, Adam CS, and Zeus Balanced ConfigurationPin No GPI Connector Pin-out ADAM, Adam CS, and ZeusGPI Output Numbers a UIO-256 GPI Input Connector J7UIO-256 GPI Outputs Connector J5 GPI Input Numbers aWire Call Receive Wire Call Send and Call Enable/InhibitCall Signal Connections for Audiocom, RTS TW and Clear-Com Wire Call SignalBalanced Audio Configuration Operating Notes for ADAM, Adam CS and Zeus Intercom Systems General InstructionsThis will open the Edit GPI Input window Switch Settings Description Internal AccessMode Dip Switch Settings Mode DIP Switch SettingsCall Signal Option Card after installation in the SSA-424A Call Signal Option Card Installation
Related manuals
Manual 2 pages 29.06 Kb