Chapter 3 BST Doorphone Installation 13
Initialize a new BST Doorphone
The system automatically recognizes the BST Doorphone once it is installed and connected. Use the following commands, to refresh the Element Manager view in order for the BST Doorphone to appear in the Active Sets panel.
•In Element Manager, click on the IP address in the Network Elements pane. Go to the top menu and select View > Refresh. Element Manager refreshes and the allows BST Doorphones to appear in the system.
The BST Doorphone will identify itself to the system as a Doorphone.
Note: The Call button’s backlight automatically turns on when the BST Doorphone is connected to a station module port on the system. The backlight is useful in low light conditions.
✙
✙
Call button
Optional Equipment
The Door Opening Controller (DOC) operates through a BST Doorphone to provide door opening control. The DOC receives data from the BST Doorphone, that is compared against a
The DOC provides convenient control of locked mechanisms but is not intended for sole building entry security. In high security environments, backup systems should be used for added protection. Power failure, device failure, wiring faults and unauthorized equipment access can all contribute to a failed locked or unlocked situation.
For more information on the DOC, refer to documentation provided with the DOC unit.
BST Doorphone Installation and Configuration Guide