8Chapter 2 DN configuration requirements for the BST Doorphone
Use Table 2 to set line access parameters for the BST Doorphone.
Table 2 Line access parameters
Tab | Attribute | Values | Description |
|
|
|
|
Main panel | Fwd No Answer | up to 24 digits | Leave blank for the BST Doorphone. |
|
|
|
|
| Fwd Busy | up to 24 digits | Leave blank for the BST Doorphone. |
|
|
|
|
Line Assignment | Line | read only | Ensure there is no line assignment for this DN. |
|
|
|
|
Line Pool | Line Pool | read only | Ensure that no line pool access is selected for this DN. |
Access |
|
|
|
|
|
|
|
Answer DNs | DN | DN number | Ensure that there are no Answer DN assignments for |
|
|
| the BST Doorphone. |
|
|
|
|
4Select the Capabilities and Preferences tab and select the DN. Additional tabs display in the details panel. You must set parameters in the main panel and under the following tabs:
•Capabilities
•Preferences
Use Table 3 to set the capabilities and preferences for the BST Doorphone.
5Repeat these steps for every BST Doorphone you plan to install on the system.
Table 3 Capabilities and preferences
Tab | Attribute | Values | Description |
|
|
|
|
Main panel | Prime line | I/C | Ensure that the prime line value is set to I/C for the |
|
|
| BST Doorphone. |
|
|
|
|
| Intercom (I/C) | 1 | Assign only one intercom key to the BST Doorphone. |
| keys |
|
|
|
|
|
|
| Control set | None | Set this value to None for the BST Doorphone. |
|
|
|
|
Capabilities | DND on busy | check box | Ensure that this check box is not selected for the BST |
|
|
| Doorphone. |
|
|
|
|
| Handsfree | None | Set this value to Auto for the BST Doorphone. |
|
| Standard |
|
|
| Auto |
|
|
|
|
|
| Paging | check box | Ensure that this check box is selected for the BST |
|
|
| Doorphone. |
|
|
|
|
| Direct dial | 0 - 9 | Set this value to 0 for the BST Doorphone. |
|
|
|
|
Preferences | Aux ringer | check box | Ensure that this check box is not selected for the BST |
|
|
| Doorphone. |
|
|
|
|
| Hotline type | None | Ensure that the Hotline type is sent to None. |
|
| Internal |
|
|
| External |
|
|
|
|
|
Note: For a detailed explanation on all line access fields, refer to your BCM Configuration Guide.