NuTone IMA-3033 Series Master Station installation instructions RADIO-INTERCOM System

Page 1

INSTALLATION

INSTRUCTIONS

RADIO-INTERCOM SYSTEM

MODEL: IMA-3303 Series Master Station

This booklet contains information for installing the Master Station. All system wiring and rough-in frames should be installed before mounting and wiring the master station.

Refer to the installation instructions packaged with the rough-in frame for detailed wiring information. For more

detailed information on wiring and mounting other system components (i.e. speakers, remote controls, etc.), refer to the installation instructions packaged with each separate component.

IMA-3303 SERIES REPRESENTATIVE WIRING ILLUSTRATION

IMA-3303 SERIES SYSTEM WIRING DIAGRAM

USE THIS DIAGRAM FOR REFERENCE ONLY – SEE IR-104 ROUGH-IN FRAME INSTALLATION INSTRUCTIONS FOR DETAILED WIRING

MODELIMA-3303 SERIES RADIO/INTERCOM MASTER IN IR-104 ROUGH-IN FRAME

Image 1
Contents RADIO-INTERCOM System Wiring Specifications InstallationSpeaker Wiring Mounting the Terminal BoardConnecting the Remote Wire Matching ChartConnecting the Door Speaker WiringMounting the Master Panel Installing and Connecting Optional Door Release Push Button Connecting AntennaSelecting Remote Radio Control Features Connecting the Master Panel to the Terminal Board Connecting Optional AccessoriesModels IA-28 or IA-29 Connecting the TransformersModel IA-29 only Securing the Master Panel Master Station Controls System Operating ControlsSetting Intercom Volume Setting System VolumeDigital Clock Operational CheckoutOperational Checkout Diagnostic TestsTrouble Possible Cause Possible Remedy Installers Troubleshooting GuideElectrical fixtures Page Page Two Year Limited Warranty