GE 25413, 25414 manual Intercom Calls, Privacy, Volume, Conference Calls, One-Touch Intercom

Page 15

Operation

Privacy

While in use, a line can be secured so that no one else can listen to the conversation. This feature only applies to model 25403, 25404, 25413, and 25414 phones. However, other phone which are not compatible with these models can still access the line.

Providing Privacy

At any time during a conversation, you can use the privacy feature to secure the line.

1.While on a line, press the PRIVACY button. The indicator turns on.

2.To cancel, press PRIVACY again or hang up.

NOTE: If you put a call on hold while in privacy mode, no one but you can access the line on hold.

Volume

The ringer, speaker, and handset/headset volume is set independently with the VOLUME up and down buttons. There are 8 possible volume settings per mode. The volume indicator scale is displayed during volume adjustment.

Ringer Volume

1.While the phone is on the hook, press the VOLUME up or down button. The phone rings according to the current setting.

2.Tap the up or down button to adjust the volume one level at a time. The phone stores the setting after the last button press.

NOTE: To turn the ringer off, on, or change the ringing pattern, see Setting the Ringer Tone.

Speakerphone, Handset, and Headset Volume

While the phone is in use, during the desired mode, press the VOLUME up or down buttons until you reach a comfortable listening level. The phone stores the setting after the last button press.

Conference Calls

This feature allows you to have a 3-way conversation using any combination of 2 lines.

To connect and conference

1.To make a call, press the line you want and dial the telephone number. If you already have someone on the line, skip to step 2.

2.Press the HOLD button to place the call on hold.

3.Press another line button and dial the telephone number of the party you want to conference with.

4.Press the CONFERENCE button.

5.Speak to both parties.

NOTE: If you have more than one line on hold, and you want to have a conference call, you must first select the line on which you want to conference.

To disconnect one party:

Press the line button for the person you want to continue speaking with, and the other party is automatically disconnected.

To disconnect both parties:

Hang up the handset, or press the SPEAKER or HEADSET button.

NOTE: If you press the HOLD button to put them on hold first, you may then disconnect from each party individually.

Intercom Calls

One-Touch Intercom

NOTE: If the INTERCOM indicator is turned on (solid red), the intercom is in use. You must wait until the indicator turns off before making an intercom call.

1. Press the INTERCOM/MEMORY LOG button (1-16) for the station you want to intercom with. The SPEAKER turns on.

Alternately, you may press the INTERCOM button, then press the INTERCOM/MEMORY LOG button (1-16) for the stations you want to intercom with. The speakerphone automatically turns on.

NOTE: If you want to switch to the handset, pick it up and continue speaking. To switch to the headset press the HEADSET button.

NOTE: The handset, headset, or speakerphone cannot be active when an intercom call is initiated (the handset should be on the cradle and the speakerphone and headset turned OFF.)

NOTE: To abort intercom call, press SPEAKER button.

2. To end the intercom call, hang up.

NOTE: If the receiving station does not answer within 45 seconds, the intercom call is cancelled. You will hear an error tone and NO ANSWER shows in the display.

NOTE: If the intercom is in use. You will hear an error tone and ERROR INHIBITED shows in the display.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model 25413/14 Notification to the Local Telephone Company Important InformationEquipment Approval Information Interference InformationFCC RF Radiation Exposure Statement LicensingHearing Aid Compatibility Table of Contents Base Layout Connections & SetupParts Checklist Telephone Jack RequirementsImportant Installation Information Important Installation GuidelinesInstalling the Phone Line 1 + Line 3 + Programming the Telephone Data PortSystem Verification Other System PhonesPhone Name Delay RingPriority Line Phone IDNo Unknown/Blocked Not applicable to model Intercom Auto AnswerFlash Time Call Alert ToneRegional Area Codes Not applicable to model Manually Setting the Time and DateDisplay Contrast Local Area Code Not applicable to modelBasic Operation OperationAnswering Calls Switching Between the Speakerphone, Handset, and HeadsetMaking Calls with the Optional Headset Pre-dialingReviewing the Redial Numbers HoldFlash RedialConference Calls VolumeIntercom Calls PrivacyCaller ID CID Receiving and Storing CID Records Caller IDIf You Programmed Your Local Area Code If You Did Not Program Your Local Area CodeMemory Call Waiting Caller IDMemory Log and Phone Book Directory Memory Memory Delete/Clear Storing the Last Number DialedStoring a Pause in Memory Dialing a Stored NumberOther Information General Product Care ServiceFor how long after your purchase Limited WarrantyAccessory Information Accessory InformationIndex
Top Page Image Contents