Making transfer settings
You can transfer a received call to another master station, another site or a telephone number.
NOTE:
This setting can be made only when the System setting on a PC has been completed.
1 Select the [Transfer] tab on the Setting window.
[F]
[G]
[H]
[I]
2 Make the settings on this window.
[F] Transfer
[Transfer]:
Set whether to enable (ON) or disable (OFF) the transferring function.
[Transfer destination] (Available when "Transfer" is set to ON):
Click Setting and the list of selectable master stations and/or remote sites are displayed in the Main window. Select the target station or remote site (so that it is
highlighted) and then click 
.
The number and name of the selected target is displayed in the boxes.
[Transfer delay] (Available when [Transfer] is set to ON and the target is selected at [Transfer destination]):
Set the delay time of starting transferring after a call is received.
[G] Schedule transfer
[Transfer]:
Set whether to enable (ON) or disable (OFF) the transferring on schedule.
[Scheduled destination] (Available when [Schedule transfer] is set to ON):
Click Setting and the list of selectable master stations and/or remote sites displayed in the Main window. Select the target station or remote site (so that it is
highlited) and then click 
.
[H] Telephone transfer
[Transfer]:
Set whether to enable (ON) or disable (OFF) the automatic transferring to telephone.
[I] Schedule tel transfer
[Transfer]:
Set whether to enable (ON) or disable (OFF) the automatic transferring to telephone on schedule.
3 Click SAVE to save the set contents and overwrite the previous ones.
*If you wish to cancel the set contents and restore the previous ones, click CANCEL .
16