Aiphone JK-1MD Entrance monitoring, Room-to-room communication, Wide/Zoom switching

Page 8

6-3 Entrance monitoring

English

Français

1

2

Press MONITOR button in the standby mode.

The video monitor displays the image from the door station and the incoming audio is heard. If you do not press TALK button, the caller will not hear sounds from the inside station.

3 Press OFF button to end communication.

NOTES:1. To talk to the entrance during entrance monitoring, momentarily press TALK button. This allows communication with the entrance.

2.The entrance monitoring turns off automatically after approx. 1 minute. To monitor the entrance again, repeat from the beginning.

3.During entrance monitoring, the monitoring time can be extended by approx. 1 min. by pressing MONITOR button.

4.During entrance monitoring, the wide picture display is used. Press ZOOM/WIDE button to switch to the zoom picture.

5.At night, the Illuminator LED will not light up until TALK button is pressed.

6.If another inside unit attempts to perform entrance monitoring while one inside unit is already doing so, a warning beep sound will occur.

Español

6-4 Room-to-room communication

Nederlands

Italiano

1

2

Press CALL button to talk with the other person.

• A call-in is sent to the sub station.

• The reply of the other person is not heard.

Or

If the other person presses TALK button, hands free communication is possible.

3 Press and release OFF button to end communication.

NOTES: 1. Room-to-room communication ends automatically after approx. 10 minutes.

To perform room-to-room communication again, repeat from the beginning.

2.If a call is received from the entrance during room-to-room communication, the image from the entrance is displayed at the monitor station and sub station where communication is taking place. Press OFF button to end the room-to-room communication,

and press TALK button to switch to communication with the door station.

6-5 Wide/Zoom switching

1 Press ZOOM/WIDE button when a picture is displayed.

Switching between wide ⇔ zoom occurs each time the button is pressed.

[Wide picture]

[Zoom picture]

NOTES: 1. When the caller is not shown in the center of the picture, the zoom picture can be moved up, down, left, and right. (Refer to section 6-6)

When switching from the wide picture to the zoom picture, the zoom picture starts at the pre-set (section 6-7) position.

The wide picture may be distorted in comparison with the zoom picture due to the characteristics of the door station camera, but this is not a malfunction.

- 8 -

Page 7 Page 9
Image 8
Page 7 Page 9
Contents JK-1MD Precautions Package ContentsCable Wiring method, wiring distanceWire the units from station-to-station daisy-chained Mounting Wiring Names JK-1MDAnswering a door call HANDS-FREE mode, PTT mode PTT modeOperations Activating door releaseRoom-to-room communication Wide/Zoom switchingEntrance monitoring Zoom Picture Preset When communication ends, the illuminator LED will go outPan/Tilt operation Night illuminationTechnical Precautions SpecificationsBacklight adjustment, Night sensitivity adjustment If optional units are installedWarranty

JK-1MD specifications

The Aiphone JK-1MD is an advanced intercom system designed to enhance home security and communication. With its modern aesthetics and robust functionality, this device stands out in the realm of intercom technology. One of the key features of the JK-1MD is its high-definition video capability. The unit boasts a 7-inch color LCD screen, providing recipients with a clear and vibrant view of visitors at their doorstep. This significant improvement over standard intercom systems allows homeowners to visually verify who is at the door before deciding to interact.

Another notable characteristic of the Aiphone JK-1MD is its two-way audio communication. The device is equipped with a high-quality microphone and speaker that facilitate clear conversations, ensuring that users can communicate effortlessly with visitors or delivery personnel. Additionally, the system supports multiple indoor monitors, allowing residents to connect multiple units throughout their home, ensuring that they can always hear the doorbell, even from distant rooms.

The JK-1MD includes a door release feature, enabling users to unlock the door remotely using their intercom system. This is particularly convenient for welcoming guests indoors without the need to physically walk to the door. The device also supports a variety of compatible door stations, enhancing its functionality and adaptability to different home setups.

One of the system's significant technological advancements is its integration with smartphone applications. Users can connect the device to their mobile phones, allowing them to receive alerts and view video feeds while away from home, providing peace of mind and added security.

The Aiphone JK-1MD is also designed with user-friendliness in mind. Its intuitive interface ensures that individuals of all ages can navigate the settings and features with ease. Furthermore, with simple installation requirements and compatibility with existing Aiphone products, it can be seamlessly integrated into both new and existing security systems.

In conclusion, the Aiphone JK-1MD intercom system combines cutting-edge technology with practical features, offering a reliable solution for home communication and security. With its high-definition video, two-way audio, remote door release capabilities, and smartphone integration, it proves to be an essential asset in modern homes.
Top Page Image Contents