Operations, Instant voice call function, PTT mode

8 OPERATIONS

8-1 Answering a door call (HANDS-FREE mode, PTT mode)

English

Français

Nederlands

1 Press CALL button.

2 Chime tone sounds, caller is seen on video monitor, and outside sound is heard.

•Audio and video turns off after approx. 45 seconds in not answered.

3 Press TALK button momentarily, and after the beep, communicate hands-free. Transmit LED (red) lights when you talk, and goes off as you listen to caller (or hear outside sounds).

4 Press TALK button once again, and after the beep, communication ends.

Instant voice call function

2 Even without answering, door area can be seen and heard with video and audio (for approx. 45 seconds). Inside sound is not heard outside.

PTT mode

3 During communication, press and hold TALK button for 1 second or more to change to press-to-talk mode. A beep sounds, and after approx. 1 second another beep sounds, PTT mode is entered. If TALK button is pressed briefly (less than 0.5 seconds), communication ends.

4 To continue speaking using the press-to-talk mode, press TALK button for 1 second or more each time to talk, and release to listen to the caller.

5 Press TALK button again momentarily, and after the beep, communication ends.

NOTES: Communication (video) ends automatically after approx. 1 minute.

NOTES: If the blue and white wires of the option connector are shorted, PTT mode will not be operable.

8-2 Activating door release

1 During communication, instant voice call or entrance monitoring, 2 Press CALL button. press MENU/MEMO button to display the menu screen.

PRESS THE TALK BUTTON TO END

NOTES: When SET DOOR RELEASE setting is set

to "Not use", the release symbol is not displayed and the release cannot be performed. (Refer to section 7-8)

			3 Open door while the release mechanism is activated. During activation of door


	PRESS THE TALK BUTTON TO END		release, the release symbol is displayed.
			release, the release symbol is displayed.

PRESS THE TALK BUTTON TO END

- 10 -