Aiphone JF-2MED, JF-2HD operation manual Wiring, Door

OG: Orange

YE: Yellow

GR: Green

BR: Brown

RD: Red

PS18

English

3 WIRING

Insert wires securely into each terminal as shown.

DOOR 1Video door station

AIPHONE

JF-DA

JF-DA

JF-2MEDMaster monitor station

JF-DV JF-DVF #2 #1

Français

Nederlands

A1 A2

2

NP

DOOR 2

AIPHONE

JF-DA

JF-DA

JF-DV JF-DVF JF-D

(Audio only)

Setting is required. (Refer to section 7-7)

P	2	Release connector	(BR)	L
					[1]	Door release
			(RD)	L
-	+	#1				or
			(OG)	SW	[2]
			(YE)	SW		RY-3DL

DC 18 V

A1 A2

Power supply +, - (DC 18 V)

Option connector	(BR)	V +	[3]
	(RD)	V -
	(OG)	b1

2

NP

Optional call extension speaker IER-2

OP	1	E
		2
	IER-2	NP

Door release

Door release EL-9S (AC 12 V, 0.35 A) or equivalent, requires a separate AC transformer. Run separate cables for audio/video and door release.

PS-1810DIN

230V AC N

L

IN 230V~ 50/60Hz NL

1A - +

-

+

18V DC 1 A

OP

PS-1820

18V DC

100V - 240V - 2 A 50/60 Hz

#2	(YE)	b2	[4]	RY-3DL
	(GR)	E
	(BL)	PK
	(PR)	FS		[6]	[5]
	(GY)	KS	[7]
	(WH)	E

To prevent shorts, be sure to cut unused lead wires at the bottom and insulate the ends.

Control external devices connected with release connector and option connector.

[1]	Door release output	Setting is required. (Refer to section 7-8)
	(AC/DC 24 V, 0.5 A N/O dry closure contact)
	Connect the brown and red wires from the release
	connector to the door release (or to the RY-3DL as shown
	in the wiring diagram).
[2]	Options output
	(AC/DC 24 V, 1.6 A N/O dry closure contact)
[3]	Video signal output
	(NTSC, 1 Vp-p/75 Ω) Wiring distance: 3 m

Door release contact: AC/DC 24 V, 0.5 A (N/O dry closure contact L, L).

Optional selective door release
adaptor RY-3DL	EL-9S
Use RY-3DL when connecting
door release to 2 locations.	EL-9S

PT

PT AC Transformer

2

NP

		EL-9S	PT
RY-3DL			JF-2MED
L1			Option connector
C1	b1		OG(b1)
L1	b2		YE(b2)
L2	b3		GR(E)
	L
C2	D1		Release connector
L2	E
	D2		BR(L)
			RD(L)
			DC 18V
			+
	+		–
	–

	[4]	Door release-linked entrance output
[1]	[5]	Press-to-talk setting input

If the blue and white wires are shorted, press-to-talk will not be operable.

[6]Foot switch input

Connect a commercially-available foot switch to the purple and white wires (N/O dry closure contact).

[7]External sensor input

Setting is required. (Refer to section 7-9)

	N/O dry closure contact
Input method	External sensor input
	(start signal only detection method)
Detection confirmation time	100 mS or more
Contact resistance	During dry closure: Less than 700 Ω
Terminal short current	Less than 10 mA
Voltage between terminals	Less than DC 20 V
	(when open between terminals)

- 4 -