Aiphone GT-1C-L Receiving Calls, Answering a call, Calling from the Doorbell Button

2RECEIVING CALLS

2-1 Answering a call

1When a call is received from an entrance station or security guard sta- tion, a call tone will sound and the STATUS LED flashes. If the station has a camera, a picture will be displayed on the monitor.

2Press the [ TALK] button once, and after the beep, communicate hands-free. Hands-free communication starts when the STATUS LED switches from blinking to steadily lit. Transmit LED lights when you talk, and goes off as you listen to the caller (or hear outside sounds).

•If you press the [ TALK] button for at least one second while talking hands-free, a beep will be emitted and you can communicate by press-to- talk communication.

•In press-to-talk communication, you press the [ TALK] button to talk and release it to listen.

•Calling turns off after a set amount of time if there is no answer. (Turning off occurs after 45 seconds for the direct select entrance station.)

•Listening is possible with hearing aids with T-mode. (GT-1C-L only)

3When you are done talking, press and hold down the [ OFF] button. The STATUS LED will go off.

NOTES: 1. If the call tone volume is turned off, the TONE OFF LED will blink with a long interval.

2.During communication, it is not possible to switch back to hands- free communication from press-to-talk communication.

3.The communication will be ended automatically after approxi- mately 1 minute when hands-free communication is made at the residential station or after approximately 3 minutes when the hand- set is used.

The unit emits an electromagnetic field. If a hearing aid with T-mode is brought too close to the unit, this may cause ear pain. (GT-1C-L only)

2-2

Calling from the Doorbell Button

1When the doorbell button is pressed, a call tone will sound while the button is being pressed.

• A different call tone sounds. (Communication is not possible.)

- 5 -