Chamberlain RFDI Assemble, Program Intercom to Doorbell, Mount Doorbell, Mounting with Screws

Assemble

Intercom

Step 1: Install 4 AA Alkaline batteries (not provided). (Lithium batteries recommended for colder environments.)

Program Intercom to Doorbell

Step 1: On the doorbell, place Dipswitch #1 to the OFF position.

Step 2: Press the Learn button on the intercom until a beep is heard.

Step 3: Within 10 seconds press the Learn button on the doorbell until a beep is heard.

Mount Doorbell

The doorbell can be mounted by using the included screws or by using the double-sided mounting tape. It is recommended to use the mounting tape on surfaces such as metal or glass.

Mounting with Screws

Step 1

Step 2: Adhere rubber pads to bottom.

Repeat Steps 1 and 2 for any additional intercoms.

Doorbell

Install 4 AA Alkaline batteries (not provided). (Lithium batteries recommended for colder environments.)

Mount doorbell with small silver screws. Screw the top two screws halfway into the mounting surface. Place back of doorbell over screws. Tighten screws.

Step 2

Put the remaining silver screws into the bottom holes of doorbell. Tighten screws.

2