Uniden XS1215 +1 owner manual Troubleshooting

Page 37

Troubleshooting

If your phone is not performing to your expectations, please try these simple steps first. If these steps do not solve your problem, visit our website for further information (www.uniden.com.au or www.uniden.co.nz).

Symptom	Suggestion

Symptom Suggestion	• Make sure the AC adapter is plugged into the cradle and wall outlet.
The charge/ in use LED or	• Make sure the handset is properly seated in the cradle.
charge LED won't illuminate	• Make sure the charging contacts on the handsets are clean.
when the handset is placed in
the cradle.

The audio sounds weak and/ or	• Move the handset and/ or main base away from metal objects or appliances and try again.
scratchy.	• Press the select key (XS1215) or the select/channel key (XS1215+1) in the talk mode to help eliminate
	background noise.
	• Make sure that the handset is not too far from the main base.

Can't make or receive calls.	• Re- register both handsets (see page 12) (XS1215+1 only).
	• Re- register both handsets (see page 12) (XS1215+1 only).
	• Check both ends of the telephone line cord.
	• Make sure the AC adapter is plugged into the main base and wall outlet.
	• Disconnect the AC adapter for a few minutes. Then reconnect it.
	• Change the digital security code (see page 32).
	• Make sure that the handset is not too far from the main base.
	• Check the dialing mode used by your telephone company.

[36]

TROUBLESHOOTING

Image 37

Contents XS1215/XS1215 +1 Contents Welcome Features Rocketdial key P Controls & Functions XS1215+1 HandsetMain Base Extra Charging Cradle XS1215+1 only Terms Used in this Manual Do the following steps Installing the PhoneInstall the Rechargeable Battery Pack into the Handset Installing the Phone Standard wall plate mounting Mount the Main Base on a WallDirect wall mounting Installing the BeltclipTo attach the beltclip To remove the beltclipHeadset Installation Register Handsets When to Re-register Handsets XS1215+1 only Activating AutoTalk Basic SetupActivating Caller ID on Call Waiting Name Tag Setting Name Tag POP IDSetting Insert Selecting the Ring Tone and Volume Making and Receiving Calls Using Your PhoneMaking a call Receiving a callRedialing the Last Dialed Number Transferring a Call XS1215+1 onlyTo transfer a call To receive a transfer callTemporarily Mute Ringer Adjusting the Earpiece VolumeTraveling Out-of-Range Selecting a Different Channel Using Call WaitingFind Handsets RocketDial Voice Mail Waiting IndicatorStoring the RocketDial Storing Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryUsing the Speed Dial Memory Page Vol/ or /vol Storing Caller ID Messages in Speed Memory LocationsEasy Dial New Zealand only Making Calls from Speed Dial MemoryCaller ID & Cidcw Caller ID and Cidcw Caller ID on Call WaitingViewing the Caller ID Message List Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Caller ID on Call Waiting Cidcw Making a Call from the Caller ID ListFor XS1215 Changing the Digital Security CodeFor XS1215+1 Battery replacement and handling Power Failure Low battery alertCleaning the battery charging contacts Power SourcesGeneral Information Operating temperatureTroubleshooting TroubleshootingAppliances To the caller, transfer the call Wipe off the liquid, and use as normal Liquid DamageX ,Y,Z IndexMemory List Warranty One Year Limited WarrantyThank YOU for Buying a Uniden Product