Uniden XS1215 +1 owner manual Liquid Damage, Wipe off the liquid, and use as normal

Page 40

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.

	Case		Action
	If the handset or base is exposed to	Wipe off the liquid, and use as normal.
	moisture or liquid, but it only affects
	the exterior plastic housing.

	If moisture or liquid has entered the	Handset:
	plastic- housing (i. e. liquid can be	1)	Remove the battery cover and leave it off for ventilation.
	heard in the phone or liquid has	1)	Remove the battery cover and leave it off for ventilation.
	heard in the phone or liquid has	2)	Remove the battery pack by disconnecting.
	entered the handset battery	2)	Remove the battery pack by disconnecting.
	entered the handset battery	3)	Leave the battery cover off and the battery pack disconnected for at least 3 days.
	compartment or vent openings on	3)
	compartment or vent openings on	4)	Once the handset is completely dry, reconnect the battery pack and the battery cover.
	the base).	4)
	the base).	5) Recharge the handset's battery pack for 20 hours before using again.

		Base:
		1)	Disconnect the AC adapter from the base unit, cutting off electrical power.
		2)	Disconnect the telephone cord from the base unit.
		3)	Let dry for at least 3 days.
		IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid
		charge interruption.
		CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause
		permanent damage to the handset, base and the microwave oven. After following these steps, if
		your cordless telephone does not work, please visit our website for further information
		(www.uniden.com.au or www.uniden.co.nz).

			[39]

Image 40

Contents XS1215/XS1215 +1 Contents Welcome Features Controls & Functions XS1215+1 Handset Rocketdial key PMain Base Extra Charging Cradle XS1215+1 only Terms Used in this Manual Installing the Phone Do the following stepsInstall the Rechargeable Battery Pack into the Handset Installing the Phone Mount the Main Base on a Wall Standard wall plate mountingInstalling the Beltclip Direct wall mountingTo attach the beltclip To remove the beltclipHeadset Installation Register Handsets When to Re-register Handsets XS1215+1 only Activating AutoTalk Basic SetupActivating Caller ID on Call Waiting Setting Name Tag POP ID Name TagSetting Insert Selecting the Ring Tone and Volume Using Your Phone Making and Receiving CallsMaking a call Receiving a callTransferring a Call XS1215+1 only Redialing the Last Dialed NumberTo transfer a call To receive a transfer callTemporarily Mute Ringer Adjusting the Earpiece VolumeTraveling Out-of-Range Selecting a Different Channel Using Call WaitingFind Handsets RocketDial Voice Mail Waiting IndicatorStoring the RocketDial Using the Speed Dial Memory Storing Names and Numbers in Speed Dial MemoryUsing the Speed Dial Memory Page Storing Caller ID Messages in Speed Memory Locations Vol/ or /volMaking Calls from Speed Dial Memory Easy Dial New Zealand onlyCaller ID and Cidcw Caller ID on Call Waiting Caller ID & CidcwViewing the Caller ID Message List Deleting a Caller ID message Deleting Information from the Caller ID ListDeleting all Caller ID names/numbers Making a Call from the Caller ID List Caller ID on Call Waiting CidcwFor XS1215 Changing the Digital Security CodeFor XS1215+1 Low battery alert Battery replacement and handling Power FailurePower Sources Cleaning the battery charging contactsOperating temperature General InformationTroubleshooting TroubleshootingAppliances To the caller, transfer the call Liquid Damage Wipe off the liquid, and use as normalIndex X ,Y,ZMemory List One Year Limited Warranty WarrantyThank YOU for Buying a Uniden Product