Making a DirectLink Call
) To call another handset with DirectLink, press the DirectLink soft key.
2)Move the pointer to select the handset you want to call, and press the OK soft key. If the handset is out of range or not in DirectLink operation, the display shows OUT OF RANGE.
3)On the receiving handset, press the ANSWER soft key or [
/flash].
Exiting a DirectLink Call
To exit the DirectLink feature and return to standby, press the CANCEL soft key and then press the OK soft key. . DIRECTLINK MODE CANCEL appears in the display.
Intercom
Making an Intercom Page
You can use the intercom to talk to another station without using the phone line. ) With the phone in standby, press [int’com/hold].
2)Use [
] or [
] to select the handset or base you want to talk with, and then press the OK soft key. If you se- lect ALL, all other registered handsets and base will be paged. An intercom tone sounds. To cancel intercom, press [
] on either handset (or [int'com/hold] or [
] on the base).
45