Registering the Handset
You must register the handset to the base before you can use it. Only one handset can be registered at a time. (If an accessory handset has previously been registered to a base, you must reset the handset before you can register it to a new base.)
1. Select your base model from this list and follow these directions:
MODEL | DIRECTIONS: |
TRU9465 | • On the base, press the MENU soft key. |
TRU9485 | |
TRU9085 | • Scroll down to REGISTER HANDSET and press the |
TRU9466 | OK soft key. |
TRU9488 | • On the handset, press and hold [#] until the display |
TRU9496 | |
TRU8888 | reads HANDSET REGISTERING and you hear a |
UIP1868P | beep. |
UIP1869V |
|
| • Disconnect the base AC adapter. |
TRU9460 | • While holding the [find hs/intercom], reconnect the |
TRU9060 | AC Adapter. |
TRU9480 | • On the handset, press and hold [#] until the display |
TRU8880 | reads HANDSET REGISTERING and you hear a |
| |
| beep. |
| • Disconnect the base AC adapter. |
| • While holding the [find handset], reconnect the AC |
TRU8860 | Adapter. |
TRU8865 | • On the handset, press and hold [#] until the display |
| reads HANDSET REGISTERING and you hear a |
| beep. |
| • Disconnect the base AC adapter. |
| • While holding the [flash/find hs], reconnect the AC |
TRU8866 | Adapter. |
TRU8885 | • On the handset, press and hold [#] until the display |
| reads HANDSET REGISTERING and you hear a |
| beep. |
5