3 Get started
Charge your headset
Note
•• Before you use your headset for the first time, charge the battery for 4 hours for optimum battery capacity and lifetime.
•• Use only the original USB charging cable to avoid any damage.
•• Finish your call before charging the headset, as connecting the headset for charging will power the headset off.
Connect the supplied USB charging cable to:
•the USB connector of the headset and;
•USB power source.
»»LED turns white during charging and turns off when the headset is fully charged.
Tip
•• Normally, a full charge takes 3 hours.
•• When your battery is empty, you can carry on listening music with an audio cable. Make sure the headset is off (and not in idle mode) before using this audio cable.
Pair the headset with your mobile phone
Before you use the headset with your mobile phone for the first time, pair it with a mobile phone. A successful pairing establishes a unique encrypted link between the headset and mobile phone.The headset stores the last 8 devices
in the memory. If you try to pair more than 8 devices, the earliest paired device is replaced by the new one.
There are two ways to pair your headset with your mobile phone:
•Manual pairing
•NFC pairing
Manual pairing
1 | Make sure that the mobile phone is turned | |
2 | on and its Bluetooth feature is activated. | |
Make sure that the headset is fully charged | ||
3 | and turned off. |
|
Press and hold | until the blue and white | |
| LED flashes alternately. | |
| »»The headset remains in pairing mode | |
4 | for 2 minutes. |
|
Pair the headset with the mobile phone. | ||
| For detailed information, refer to the user | |
| manual of your mobile phone. | |
NFC pairing
1 | Make sure that the mobile phone is turned |
2 | on. |
Make sure that the headset is fully charged | |
3 | and turned off. |
Press and hold until the blue and white | |
4 | LED flashes alternately.. |
Make sure you turn on the NFC function | |
| on your phone and your phone’s screen |
5 | remains active. |
Place your phone over the headset so that |
the NFC detection area of each device can touch each other.
Note
•• Make sure your mobile phone has the NFC feature available and switched on.
•• Make sure your mobile phone is not in standby mode.
•• Pairing with NFC is only suitable for Android mobile operating system 4.2 or above.
•• Refer to the user manual of your mobile phone to identify its NFC detection area.
EN 5