3 Get started
Charge the headset
Warning
•• Before you use your headset for the first time, charge the battery for four hours for optimum battery capacity and lifetime.
•• Use only the original USB charging cable to avoid any damage.
•• Finish your call before charging the headset, as connecting the headset for charging will power off the unit.
•• You can operate the headset normally during charge.
1 Remove the USB cap.
2 Plug the headset into a powered USB port with USB charging cable.
»» LED turns red during charge and turns off when the headset is fully charged.
Pair the headset with your mobile phone
Before you use the headset with a mobile phone for the first time, pair it with the mobile phone. A successful pairing establishes a unique encrypted link between the headset and the mobile phone. The headset stores the last three links in the memory. If you try to pair more than three devices, the link for the earliest paired device is overwritten.
1
2
3
4 Pair the headset with the mobile phone. For details, refer to the user manual of the mobile phone.
A sample pairing is shown below.
1 Under Bluetooth menu on the mobile phone, search for the headset.
2 On mobile phones using Bluetooth 2.1 or higher, you do not need to enter a pass code.
3 From the found devices, select Philips SHB6017.
• Enter “0000” (4 zeros), if prompted to enter the pin code of the headset.
10:35 | 10:36 | 10:37 |
Settings | Connectivity | Settings |
| Settings | Connectivity | ||
Bluetooth |
| Devices Found |
|
|
|
|
|
Add |
| Philips SHB6017 | Enter Password | ||||
|
|
|
|
| |||
Bluetooth |
|
|
|
| **** |
| |
device |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| 0000 |
|
|
| Select |
|
|
|
|
|
Select | Back | Back | Select | Back | |||
Tip
•• Typically, a full charge takes two hours.
6EN