are now connected to the second call.
2 Press R and to end the current call and answer the second call.
Toggle between two calls
1 Press R and .
»» The current call is put on hold, and you are now connected to the other call.
Make a conference call with the external callers
Note
•• This service is network dependent. Check with the service provider for additional charges.
When you are connected to two calls, press R,
then .
»» The two calls are combined and a conference call is established.
The first call is put on hold, and you
»»
to answer the call.
Press R and
When there is a periodical beep to notify you of an incoming call, you can answer the call in these ways:
1
»» The number displayed on the screen is dialed out.
Answer a second call
Note
•• This service is network dependent.
Dial the second number.
2
The first call is put on hold.
»»
Press R during a call.
1
Answer a call
When the phone rings, press | to answer |
the call. |
|
Note
•• The caller ID service is available if you have registered to the caller ID service with your service provider.
Tip
•• When there is a missed call, the handset displays a notification message.
Turn off the ringer for all incoming calls
There are two ways to turn off the ringer:
1 Press and hold 
in standby mode. »» 
displays on the screen.
2 When the phone rings, press BACK.
Adjust the earpiece volume
Press 
or 
to adjust the volume during a call.
The earpiece volume is adjusted and the phone is back to the call screen.
Mute the microphone
1 Press 
during a call.
»» The handset displays [MUTE ON].
»» The caller cannot hear you, but you can still hear his voice.
2 Press 
again to unmute the microphone. »» You can now communicate with the
caller.
Make a second call
Note
•• This service is network dependent.
16EN