Philips CD170, CD175 Make a call to another handset, Transfer a call, Make a conference call

Press INT.

The current caller is put on hold.

Select a handset number, then press OK to confirm.

»» Wait for the other side to answer your call.

5Intercom and conference calls

An intercom call is a call to another handset that shares the same base station. A conference call involves a conversation among you, another handset user and the outside callers.

Make a call to another handset

Note

•• If the base station only has 2 registered handsets, press INT to make a call to another handset.

1	Press INT.
	»» The handsets available for intercom are
2	displayed.
	Select a handset number, then press OK
	to confirm.
3	»» The selected handset rings.
	Press	on the selected handset.
4	»» The intercom is established.
	Press	to cancel or end the intercom

call.

Note

•• If the selected handset is occupied in a call, you hear a busy tone.

While you are on the phone

You can go from one handset to another during a call:

1

2

3

Toggle between calls

Press INT to switch between the outside call and the intercom call.

Transfer a call

1 Press INT during a call.

2 Select a handset number, then press OK to confirm.

3 Press when the other side answers your call.

»» The call is now transferred to the selected handset.

Make a conference call

A 3-way conference call is a call between you, another handset user and the outside callers. It re- quires two handsets to share the same base station.

During an external call

1	Press INT to initiate an internal call.
	»» The handsets available for intercom are
	displayed.
2	»» The external caller is put on hold.
	Select a handset number, then press OK
	to confirm.
3	»» The selected handset rings.
	Press	on the selected handset.
4	»» The intercom is established.
	Press and hold INT on your handset.
	»» You are now on a 3-way conference
	call with the external call and the
5	selected handset.
	Press	to end the conference call.

During the conference call

1 Press INT to put the external call on hold and go back to the internal call.

»» The external call is put on hold.

2 Press INT to toggle between the external and internal call.

3 Press and hold INT to establish the conference call again.

Note

•• If a handset hangs up during the conference call, the other handset remains connected to the external call.

English

EN 17